Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Flex 6400 : 3.5.9 upgrade, SmartLink Worked Fine and then Broke
I upgraded my 6400 at 9:00 AM this morning Central time. Both Smart SDR and SmartLink worked fine after re-registering SmartLink; got the green test light A-OK. At 1:30PM several hours have past and …1 -
Re: Audio clicking on Tx
On 80 M at 7:30 AM CDT this morning three of us all using Flex Signature Series radios; K0KP, W0LS, and K0EOO were part of a round table. All three of us were local and not remote. Seemingly out of n…1 -
Re: Flex 6400M noise floor
It appears that the following phenomenon is evident. The design of the Flex makes for an S Meter that is incapable of displaying, on the meter that is, a signal below S 4 in strength. This is because…1 -
Re: Adaptor schematic to extend battery connexion
yes you should be able to build or retrofit, 24 gage wire minimum for the current carrying conductors, ensure polarity is correct, check to make sure the wire doesn't get too warm, well insulate…1 -
Re: Give us a Choice with the S Meter
Let's not forget that ham radio is supposed to be fun! Some of us are taking ourselves way too seriously. This started as a suggestion *IDEA* to include a little check box in the software to emu…1
